Guidelines and Recommendations
| Number | Description | EN | ES | |||
| N/A | Tecumseh Alternate Refrigerant Position Letter |  |
||||
| N/A | Tecumseh Global Refrigerant Vision | |
||||
| RD-0001-E | Tecumseh Refrigerant Matrix | |
||||
| RD-0003-E Rev 1 | Service Guidelines HCFC R22 to HFC Blends | |
||||
| RD-0002-E Rev 2 | Tecumseh R22 Alternate Refrigerant Selection Guidelines | |
||||
| N/A | Guidelines for Utilization of R134a and R513a | |
||||
| RD-0022-E | Guidelines for Utilization of R407A, R448A, R449A Rev2 | |
||||
| N/A | Guidelines for Utilization of R410A | |
||||
| RD-0007-E | Guidelines for Utilization of R404A and R452A | |
||||
| N/A | Guidelines for Utilization of R407C | |
||||
| N/A | Guidelines for Utilization of R600A and R290 | |
||||
| ER1 | Refrigerant Line Sizes for Remote Systems | |
||||
| ER2 | Procedures Involving Processing and Start Up | |
||||
| ER3 | Cap Tube Sizing | |
||||
| ER4 | Application of Remotely Mounted Systems | |
||||
| ER7 | Time Delay Relay | |
||||
| ER8 | Refrigerant Line Sizes for Remote Systems | |
||||
| ER9 | System Design Considerations for Good Oil Return on Commercial Systems | |
||||
| ER10 | Machine Compartment Design in Cabinets | |
||||
| ER11 | Refrigerant Strainers for Systems | |
||||
| ER12 | Accumulators | |
||||
| ER13 | Heat Pump Water Heater | |
||||
| ER14 | Wiring Practices for External Overload Compressors | |
||||
| ER15 | Factory Test Pressures | |
||||
| ER16 | Compressor Cycling | |